When the clock stops lighting up, it can be unpleasant. So you have to replace the display bulb of this Toyota Land Cruiser Serie 70. Even if the dashboard remains functional, we lack certain information to circulate comfortably. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages to remember the reverse process, especially regarding connectors. To carry out this task, plan around a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, step by step.
How to change the bulb on the display of the Toyota Land Cruiser Serie 70
Depending on the release dates, the methodology may vary slightly. It is possible that some covers or screws differ. Here is the general procedure to follow.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Toyota Land Cruiser Serie 70. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave us a comment if you have encountered specific malfunctions.