When the clock stops lighting up, it can get annoying. It will therefore be necessary to replace the display bulb of the Toyota Land Cruiser Serie 90. Although the dashboard is still functional, we are missing some indications to drive in sufficient comfort. This operation is not hard to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages to remember the reverse process, especially regarding connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Land-Cruiser-Serie-90

How to change the bulb on the display of the Toyota Land Cruiser Serie 90

Depending on the years of production, the methodology may vary slightly. It remains conceivable that several covers or screws are not identical. We therefore suggest the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Toyota Land Cruiser Serie 90. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.