When the clock stops lighting up, it can be annoying. So you have to change the display bulb of the Toyota Land Cruiser Sw Serie 100. Even if the dashboard is still operational, several pieces of information are missing in order to drive in good conditions. This operation is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, especially for the connectors. To carry out this manipulation, count approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Land-Cruiser-Sw-Serie-100

How to change the bulb on the Toyota Land Cruiser Sw Serie 100 display

Depending on the release dates, the methodology may vary a little. It is likely that several covers or screws differ. So that's the general approach to follow.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of your Toyota Land Cruiser Sw Serie 100. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered specific problems.