When the clock stops working, it can be unpleasant. So you have to replace the display bulb of the Toyota Land Cruiser Sw Serie 200. Although the instrument panel is still operational, we lack certain information to circulate in sufficient comfort. This action is not difficult to perform, but requires a minimum of rigor. It is indeed advisable to take pictures at different stages to remind you of the reverse manipulation, especially for the connectors. To complete this task, count roughly a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's look at how to replace this bulb, point by point.
How to change the bulb on the Toyota Land Cruiser Sw Serie 200 display
Depending on the years of production, the method may vary a little. It remains likely that several covers or screws differ. This is therefore the procedure to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of this Toyota Land Cruiser Sw Serie 200. You can therefore remove all of the connectors from the unit, provided you remember the location. Help yourself with your camera if needed.
- Normally you can access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific problems.