When the clock doesn't light up anymore, it can be annoying. It will therefore be necessary to replace the display bulb of this Toyota Land Cruiser Sw Serie 50. Even if the dashboard remains functional, we lack several indications in order to drive in sufficient comfort. This action is not hard to perform, but requires a minimum of rigor. It is indeed advisable to take pictures at certain stages in order to remind yourself of the reverse manipulation, in particular concerning the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, step by step.
How to change the bulb on the Toyota Land Cruiser Sw Serie 50 display
Depending on the production dates, the methodology may vary a little. It remains conceivable that some covers or screws are not identical. This is therefore the general approach to be followed.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this case, keep them preciously aside.
- Once the facade is completely dismantled, you must disconnect connectors which connect to the clock bulb of the Toyota Land Cruiser Sw Serie 50. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage as well obviously.
- Place the new bulb making sure it sits well at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered particular concerns.