When the clock runs out of light, it can get annoying. So you have to replace the display bulb of this Toyota Land Cruiser Sw Serie 60. Although the dashboard remains functional, it lacks several indications to drive comfortably. This action is not difficult to execute, but requires a minimum of rigor. We advise you to take photos at certain stages to remember the reverse manipulation, especially for connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Land-Cruiser-Sw-Serie-60

How to change the bulb on the Toyota Land Cruiser Sw Serie 60 display

Depending on the release year, the method may vary slightly. Some covers or screws may differ. Here is the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Toyota Land Cruiser Sw Serie 60. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage as well of course.
  • Put in the new bulb by checking that it is located at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave us a comment if you have encountered specific malfunctions.