When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of the Toyota Land Cruiser Sw Serie 80. Although the dashboard remains operational, certain information is missing in order to circulate in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages in order to remember the reverse manipulation, especially for connectors. To do this, count roughly a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Toyota Land Cruiser Sw Serie 80 display
Depending on the years of circulation, the methodology may vary a little. It is conceivable that some covers or screws differ. This is the logic to follow in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Land Cruiser Sw Serie 80. You will therefore be able to remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- You can normally access the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific problems.