When the clock stops working, it can be annoying. We will therefore have to replace the display bulb of this Toyota Mirai. Although the dashboard is still operational, we are missing several pieces of information to drive comfortably. This action is not difficult to perform, but requires a minimum of rigor. It is indeed advisable to take photos at different stages to remind you of the opposite approach, especially regarding connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, step by step.change-bulb-clock-Toyota-Mirai

How to change the bulb on the Toyota Mirai display

Depending on the years of circulation, the methodology may vary a little. Several covers or screws may not be identical. So that's the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Toyota Mirai. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered specific malfunctions.