When the clock stops lighting up, it can be annoying. So you have to change the display bulb of the Toyota Model F. Although the dashboard remains functional, we lack some information to circulate in sufficient comfort. This action is not complex to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at different stages to remember the reverse approach, especially regarding connectors. To execute this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to replace this bulb, step by step.
How to change the bulb on the Toyota Model F display
Depending on the years of circulation, the method may vary a little. It is likely that several covers or screws differ. Here is therefore the procedure to be followed in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of your Toyota Model F. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the damaged bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension too of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave us a comment if you have encountered particular malfunctions.