When the clock is out of light, it can get annoying. It will therefore be necessary to replace the display bulb Toyota Mr 2. Even if the dashboard remains functional, we lack some indications in order to drive in good conditions. This operation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.
How to change the light bulb on the Toyota Mr 2 display
Depending on the years of circulation, the methodology may vary a little. It is likely that some covers or screws are not identical. We thus offer you the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors which connect to the clock bulb of the Toyota Mr 2. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
- You can normally have access to the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also obviously.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered any particular problems.