When the clock stops working, it can be unpleasant. So you have to change the display bulb of this Toyota Mtrc. Although the dashboard is still functional, we lack certain indications to circulate in sufficient comfort. This operation is not difficult to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages to remember the reverse process, especially for connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Mtrc

How to change the bulb on the Toyota Mtrc display

Depending on the year of release, the methodology may vary a little. It is possible that several covers or screws differ. Here is the procedure to follow in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Mtrc. You can thus remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally access the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage as well obviously.
  • Put in the new bulb by checking that it is located at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered particular problems.