When the clock stops lighting up, it can be annoying. So you have to change the display bulb of this Toyota Picnic. Even if the dashboard remains functional, we are missing some information in order to circulate in good conditions. This action is not complex to perform, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages in order to remind you of the reverse approach, in particular concerning the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Picnic

How to change the bulb on the Toyota Picnic display

Depending on the release dates, the procedure may vary slightly. It remains likely that some covers or screws differ. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of your Toyota Picnic. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The tension also of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered specific malfunctions.