When the clock stops working, it can get annoying. It will therefore have to change the display bulb of the Toyota Pod. Although the dashboard remains functional, we are missing some information in order to drive comfortably. This action is not hard to perform, but requires a minimum of thoroughness. It is advisable to take pictures at certain stages in order to remind you of the reverse process, in particular for the connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's look at how to change this bulb, point by point.
How to change the Toyota Pod display bulb
Depending on the production dates, the method may vary slightly. It remains conceivable that some covers or screws are not identical. Here is the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this case, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors which connect to the clock bulb of this Toyota Pod. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if necessary.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage also obviously.
- Place the new bulb making sure it sits well at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave us a comment if you have encountered specific malfunctions.