When the clock stops working, it can get unpleasant. It will therefore have to change the display bulb Toyota Previa 2. Although the dashboard remains functional, it lacks some indications to drive in good conditions. This manipulation is not hard to perform, but requires a minimum of rigor. It is indeed advisable to take pictures at certain stages to remember the reverse manipulation, especially concerning the connectors. To complete this task, count roughly a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.
How to change the display bulb of the Toyota Previa 2
Depending on the years of circulation, the procedure may vary a little. It is possible that some covers or screws differ. We therefore suggest the general procedure to follow.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of this Toyota Previa 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- You can normally access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also obviously.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific malfunctions.