When the clock stops working, it can be annoying. So you have to replace the display bulb of the Toyota Previa. Although the dashboard is still operational, we are missing some indications in order to circulate comfortably. This action is not hard to execute, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To execute this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Previa

How to change the light bulb on the Toyota Previa display

Depending on the release dates, the methodology may vary slightly. It is possible that some covers or screws differ. So that's the general approach.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of this Toyota Previa. This will allow you to remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also naturally.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular problems.