When the clock runs out of light, it can get unpleasant. It will therefore have to change the display bulb of this Toyota Prius 3 Rechargeable. Even if the dashboard is still operational, some information is missing in order to drive in good conditions. This action is not complex to perform, but requires a minimum of thoroughness. It is also advisable to take photos at different stages in order to remember the reverse manipulation, especially for the connectors. To carry out this manipulation, allow approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Prius-3-Rechargeable

How to change the bulb on the Toyota Prius 3 Rechargeable display

Depending on the years of production, the procedure may vary slightly. It remains likely that some covers or screws differ. Here is the logic to follow in general.

  • Start with remove the covers of the front panel which hinder access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Toyota Prius 3 Rechargeable. You can thus remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered specific concerns.