When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of this Toyota Prius 3. Although the dashboard remains functional, we are missing some information in order to circulate comfortably. This manipulation is not difficult to perform, but requires a minimum of thoroughness. It is advisable to take pictures at certain stages in order to remind you of the reverse process, in particular concerning the connectors. To complete this task, allow about a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Toyota-Prius-3

How to change the display bulb of the Toyota Prius 3

Depending on the years of release, the methodology may vary a little. It remains likely that several covers or screws differ. Here is the logic to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this case, keep them carefully aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of your Toyota Prius 3. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if necessary.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
  • Put in the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave a comment if you have encountered specific malfunctions.