When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of this Toyota Prius 4 Rechargeable. Although the dashboard remains operational, we are missing several indications to circulate in good conditions. This action is not difficult to perform, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the opposite approach, especially regarding connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the Toyota Prius 4 Rechargeable display
Depending on the release dates, the methodology may vary slightly. It remains likely that some covers or screws are not identical. Here is the procedure to follow in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Prius 4 Rechargeable. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
- Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered particular concerns.