When the clock stops lighting up, it can be annoying. So you have to replace the display bulb of the Toyota Prius 4. Although the dashboard remains functional, we lack several indications in order to circulate in sufficient comfort. This manipulation is not difficult to achieve, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, allow approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Prius-4

How to change the display bulb of the Toyota Prius 4

Depending on the release dates, the method may vary slightly. It is likely that some covers or screws differ. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of the Toyota Prius 4. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if necessary.
  • Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered specific problems.