When the clock stops lighting up, it can be unpleasant. So you have to replace the display bulb of this Toyota Proace Verso. Even if the dashboard remains functional, we are missing several indications to drive comfortably. This action is not hard to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remember the reverse process, especially regarding connectors. To carry out this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Toyota-Proace-Verso

How to change the bulb on the Toyota Proace Verso display

Depending on the years of production, the methodology may vary a little. It is possible that several covers or screws differ. This is therefore the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Toyota Proace Verso. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can access the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also naturally.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered particular problems.