When the clock has no more light, it can be annoying. So you have to replace the display bulb of this Toyota Rav 4 (2nd Generation). Even if the dashboard remains operational, it lacks several indications in order to circulate in sufficient comfort. This action is not complex to execute, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to replace this bulb, step by step.
How to change the light bulb on the Toyota Rav 4 (2th Generation) display
Depending on the release dates, the method may vary a little. It is conceivable that some covers or screws differ. We therefore offer you the logic to follow in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
- Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of the Toyota Rav 4 (2nd Generation). You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular problems.