When the clock runs out of light, it can get annoying. It will therefore have to change the display bulb of this Toyota Rav 4 (3rd Generation). Even if the dashboard remains operational, there are some indications missing to circulate in good conditions. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan about a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's look at how to replace this bulb, point by point.change-bulb-clock-Toyota-Rav-4- (3th-Generation)

How to change the light bulb on the Toyota Rav 4 (3th Generation) display

Depending on the release dates, the procedure may vary slightly. It is likely that several covers or screws differ. This is the logic to follow in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of this Toyota Rav 4 (3rd Generation). You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can access the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension too of course.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.