When the clock has no more light, it can be annoying. So we will have to change the display bulb of the Toyota Rav 4 (4th Generation). Even if the dashboard remains functional, we are missing certain information in order to circulate in good conditions. This manipulation is not hard to execute, but requires a minimum of rigor. We advise you to take photos at certain stages in order to remember the reverse process, especially regarding connectors. To carry out this task, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.
How to change the light bulb on the Toyota Rav 4 (4th Generation) display
Depending on the years of circulation, the methodology may vary a little. It is likely that some covers or screws differ. So that's the logic to follow in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
- Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of this Toyota Rav 4 (4th Generation). You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage as well of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific malfunctions.