When the clock runs out of light, it can get unpleasant. So you have to replace the display bulb of the Toyota Rav 4. Although the dashboard remains operational, we are missing several pieces of information in order to drive in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To complete this task, count roughly a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's look at how to change this bulb, point by point.
How to change the display bulb of the Toyota Rav 4
Depending on the production dates, the methodology may vary slightly. It is conceivable that some covers or screws differ. We therefore suggest the procedure to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the front is completely removed, you need disconnect connectors which connect to the clock bulb of your Toyota Rav 4. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered specific malfunctions.