When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of the Toyota Starlet. Even if the dashboard remains operational, some information is missing in order to drive comfortably. This action is not hard to execute, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, point by point.change-bulb-clock-Toyota-Starlet

How to change the bulb on the Toyota Starlet display

Depending on the years of production, the method may vary slightly. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors that connect to the clock bulb of your Toyota Starlet. You can thus remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave a comment if you have encountered particular problems.