When the clock runs out of light, it can be unpleasant. It will therefore be necessary to replace the display bulb of the Toyota Supra Mki. Even if the dashboard remains functional, it lacks certain indications to drive comfortably. This operation is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remember the reverse manipulation, especially for connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Toyota Supra Mki display
Depending on the years of circulation, the methodology may vary a little. Some covers or screws may not be the same. So that's the general approach to follow.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Toyota Supra Mki. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
- You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave us a comment if you have encountered specific malfunctions.