When the clock stops working, it can be unpleasant. So you have to change the display bulb of this Toyota Supra Mkii. Although the dashboard remains operational, we are missing some information to drive in good conditions. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind you of the reverse manipulation, especially for the connectors. To carry out this manipulation, allow approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Supra-Mkii

How to change the display bulb of the Toyota Supra Mkii

Depending on the release dates, the methodology may vary slightly. It is conceivable that some covers or screws are not identical. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
  • Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of this Toyota Supra Mkii. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if necessary.
  • You can normally access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered particular malfunctions.