When the clock stops working, it can be annoying. It will therefore be necessary to replace the display bulb of the Toyota Supra Mkiii. Even if the dashboard is still operational, we are missing some indications in order to drive in good conditions. This action is not hard to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To perform this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, point by point.change-bulb-clock-Toyota-Supra-Mkiii

How to change the bulb on the Toyota Supra Mkiii display

Depending on the years of production, the method may vary a little. It remains likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of the Toyota Supra Mkiii. You can therefore remove all of the connectors from the block, as long as you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered particular concerns.