When the clock runs out of light, it can get annoying. So you have to change the display bulb of this Toyota Supra Mkiv. Even if the dashboard remains operational, we are missing certain indications in order to circulate comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at different stages in order to remember the reverse approach, especially for connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Toyota-Supra-Mkiv

How to change the bulb on the Toyota Supra Mkiv display

Depending on the years of circulation, the procedure may vary a little. It remains likely that some covers or screws are not identical. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of your Toyota Supra Mkiv. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also naturally.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular problems.