When the clock stops working, it can get annoying. So you have to change the display bulb of the Toyota Tercel. Even if the dashboard is still functional, some information is missing to circulate comfortably. This action is not complex to perform, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remind you of the reverse process, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Toyota-Tercel

How to change the bulb on the Toyota Tercel display

Depending on the release dates, the procedure may vary slightly. It remains likely that some covers or screws differ. This is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors that connect to the clock bulb of your Toyota Tercel. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension too of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave us a comment if you have encountered any particular problems.