When the clock doesn't light up anymore, it can be annoying. So we will have to change the display bulb of this Toyota Tundra. Even if the dashboard remains operational, we are missing certain indications to circulate in sufficient comfort. This manipulation is not complex to execute, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remember the reverse manipulation, especially for connectors. To execute this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Toyota-Tundra

How to change the bulb on the Toyota Tundra display

Depending on the release dates, the method may vary slightly. Some covers or screws may differ. This is the logic to follow in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Toyota Tundra. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension as well obviously.
  • Place the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave us a comment if you have encountered any particular concerns.