When the clock has run out of light, it can be annoying. So we have to change the display bulb of the Toyota Urban Cruiser. Although the dashboard is still operational, we lack some indications to circulate in good conditions. This manipulation is not hard to achieve, but requires a minimum of rigor. It is also advisable to take pictures at certain stages to remind you of the reverse manipulation, especially concerning the connectors. To complete this task, plan approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Toyota-Urban-Cruiser

How to change the Toyota Urban Cruiser display bulb

Depending on the release years, the methodology may vary slightly. It is conceivable that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the front is completely removed, you need disconnect connectors connected to the clock bulb of your Toyota Urban Cruiser. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • Normally you can access the damaged bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also naturally.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered particular malfunctions.