When the clock stops working, it can be unpleasant. So you have to change the display bulb of the Toyota Uuv. Even if the dashboard remains functional, it lacks several indications to circulate comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at different stages to remind you of the opposite approach, especially concerning connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, step by step.
How to change the bulb on the Toyota Uuv display
Depending on the release year, the procedure may vary slightly. It is possible that several covers or screws are not identical. Here is therefore the procedure to be followed in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of the Toyota Uuv. You can therefore dismantle all of the block's connectors, as long as you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered particular problems.