When the clock stops working, it can get annoying. So you have to replace the display bulb of this Toyota Verso-s. Although the dashboard is still operational, we lack some indications to circulate in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially regarding connectors. To accomplish this task, count roughly a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb, step by step.
How to change the bulb on the Toyota Verso-s display
Depending on the year of release, the methodology may vary a little. It is conceivable that several covers or screws differ. Here is the procedure to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors that connect to the clock bulb of your Toyota Verso-s. You can thus dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can access the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific malfunctions.