When the clock stops working, it can be annoying. So you have to replace the display bulb of the Toyota Yaris 2 Ts. Even if the dashboard remains operational, we are missing some information in order to drive in sufficient comfort. This manipulation is not complex to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages in order to remember the reverse process, especially for connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's look at how to change this bulb, point by point.change-bulb-clock-Toyota-Yaris-2-Ts

How to change the light bulb on the display of the Toyota Yaris 2 Ts

Depending on the release dates, the procedure may vary slightly. It is possible that some covers or screws are not identical. Here is the general procedure to follow.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. Therefore, keep them preciously aside.
  • Once the front is completely removed, you need disconnect connectors connected to the clock bulb of this Toyota Yaris 2 Ts. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave a comment if you have encountered particular problems.