When the clock stops working, it can get annoying. So we will have to change the display bulb Toyota Yaris 2. Although the instrument panel is still operational, some information is missing for good driving conditions. This operation is not complex to perform, but requires a minimum of rigor. We also advise you to take pictures at certain stages to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, allow approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.
How to change the display bulb of the Toyota Yaris 2
Depending on the year of release, the methodology may vary a little. It is conceivable that some covers or screws differ. Here is therefore the procedure to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Toyota Yaris 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension as well obviously.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered particular problems.