When the clock stops working, it can be annoying. So we will have to change the display bulb of this Toyota Yaris 3 Grmn. Even if the dashboard is still operational, we are missing certain information in order to circulate comfortably. This manipulation is not hard to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this task, count approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.
How to change the light bulb on the Toyota Yaris 3 Grmn display
Depending on the release dates, the methodology may vary slightly. It remains conceivable that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors connected to the clock bulb of this Toyota Yaris 3 Grmn. You can thus dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
- Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage as well of course.
- Place the new bulb by checking that it is located at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific problems.