When the clock stops working, it can be unpleasant. We will therefore have to replace the display bulb of the Toyota Yaris 3. Although the dashboard is still functional, we are missing some information in order to circulate comfortably. This manipulation is not complex to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remember the reverse process, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the display bulb of the Toyota Yaris 3
Depending on the release dates, the methodology may vary slightly. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of the Toyota Yaris 3. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave us a comment if you have encountered particular malfunctions.