When the clock stops lighting up, it can be annoying. So you have to change the display bulb of the Toyota Yaris Ts. Even if the dashboard is still operational, we are missing some information in order to circulate comfortably. This action is not hard to perform, but requires a minimum of rigor. We advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, step by step.
How to change the light bulb on the Toyota Yaris Ts display
Depending on the years of circulation, the method may vary a little. It is possible that several covers or screws differ. This is the general approach to follow.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Toyota Yaris Ts. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific problems.