When the clock stops lighting up, it can get unpleasant. It will therefore be necessary to replace the display bulb of this Toyota Yaris Verso. Although the dashboard is still functional, there are some indications missing to circulate in sufficient comfort. This manipulation is not hard to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the opposite approach, especially regarding connectors. To perform this task, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, step by step.
How to change the bulb on the Toyota Yaris Verso display
Depending on the years of circulation, the method may vary a little. It is conceivable that some covers or screws are not identical. So that's the general approach to follow.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this case, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors that connect to the clock bulb of your Toyota Yaris Verso. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the defective bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also obviously.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered particular problems.