When the clock has no more light, it can be annoying. So you have to replace the display bulb of this Toyota Yaris. Even if the dashboard is still functional, it lacks several indications to drive in good conditions. This manipulation is not complex to perform, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remind you of the reverse process, especially regarding connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Toyota-Yaris

How to change the bulb on the Toyota Yaris display

Depending on the release dates, the methodology may vary a little. It is conceivable that some covers or screws differ. This is therefore the logic to be followed in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the Toyota Yaris clock bulb. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also obviously.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered particular problems.