When the clock runs out of light, it can be unpleasant. So you have to replace the display bulb of the Volkswagen Golf 5 R32. Although the dashboard remains operational, several pieces of information are missing in order to drive comfortably. This manipulation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remember the reverse process, especially concerning the connectors. To accomplish this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the display bulb of the Volkswagen Golf 5 R32
Depending on the release dates, the method may vary slightly. It remains likely that some covers or screws are not identical. We therefore offer you the logic to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of your Volkswagen Golf 5 R32. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave us a comment if you have encountered specific problems.