When the clock stops lighting up, it can get annoying. So we will have to change the display bulb of this Volkswagen Golf 6 R. Even if the dashboard remains functional, it lacks several indications to drive comfortably. This manipulation is not hard to perform, but requires a minimum of thoroughness. It is advisable to take pictures at certain stages to remind you of the reverse manipulation, especially concerning the connectors. To complete this task, allow approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Volkswagen-Golf-6-R

How to change the bulb on the Volkswagen Golf 6 R display

Depending on the years of release, the method may vary slightly. It remains conceivable that some covers or screws are not identical. This is therefore the general approach to be followed.

  • Start by remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of your Volkswagen Golf 6 R. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also naturally.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave a comment if you have encountered specific malfunctions.