When the clock stops working, it can be unpleasant. So you have to change the display bulb Volkswagen Golf 6 Sw. Even if the dashboard remains functional, it lacks some indications in order to drive in sufficient comfort. This operation is not hard to execute, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this task, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's look at how to replace this bulb, point by point.change-bulb-clock-Volkswagen-Golf-6-Sw

How to change the bulb on the Volkswagen Golf 6 Sw display

Depending on the production dates, the methodology may vary slightly. It remains possible that several covers or screws are not identical. We therefore propose the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them preciously aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of this Volkswagen Golf 6 Sw. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally have access to the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension as well obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered specific problems.