When the clock has no more light, it can be annoying. So you have to change the display bulb of the Volkswagen Golf 6. Although the dashboard is still operational, we lack some indications to circulate comfortably. This action is not difficult to perform, but requires a minimum of rigor. We recommend that you take pictures at different stages to remember the reverse process, especially for the connectors. To complete this task, allow about a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's look at how to replace this bulb, point by point.
How to change the bulb on the Volkswagen Golf 6 display
Depending on the years of circulation, the procedure may vary slightly. It is possible that some covers or screws differ. This is the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of your Volkswagen Golf 6. You can therefore remove all of the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also obviously.
- Place the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific problems.