When the clock runs out of light, it can be annoying. So you have to replace the display bulb of this Volkswagen Golf 7 Sw R. Although the dashboard is still operational, certain indications are missing for driving under good conditions. This operation is not complex to perform, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages to remind you of the opposite approach, in particular concerning connectors. To accomplish this task, count roughly a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Volkswagen Golf 7 Sw R display
Depending on the year of exit, the methodology may vary slightly. Some covers or screws may differ. Here is the general procedure to follow.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this case, keep them preciously aside.
- Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of the Volkswagen Golf 7 Sw R. You will therefore be able to disassemble all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also naturally.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered specific concerns.