When the clock doesn't light up anymore, it can be annoying. So you have to replace the display bulb of this Volkswagen Golf 7 Sw. Even if the dashboard is still functional, several indications are missing to circulate in sufficient comfort. This manipulation is not difficult to achieve, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remind you of the reverse manipulation, especially for the connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Volkswagen Golf 7 Sw display
Depending on the release years, the method may vary a little. It is likely that some covers or screws differ. This is the general approach to follow.
- Start by remove the covers from the front that impede access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
- Once the facade has been completely dismantled, you must disconnect connectors connected to the clock bulb of your Volkswagen Golf 7 Sw. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific concerns.