When the clock stops working, it can be annoying. So you have to replace the display bulb of this Volkswagen Golf 7. Even if the dashboard is still operational, there is a lack of information to drive in sufficient comfort. This operation is not difficult to carry out, but requires a minimum of rigor. We advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To carry out this task, plan around a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Volkswagen-Golf-7

How to change the bulb on the Volkswagen Golf 7 display

Depending on the release dates, the methodology may vary a little. It is likely that some covers or screws differ. Here is the procedure to follow in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Volkswagen Golf 7. You can thus remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • Normally you can access the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb by checking that it is located at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered specific problems.