When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of this Volkswagen Golf Plus. Even if the dashboard is still operational, we lack some indications to drive comfortably. This action is not complex to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages to remember the reverse manipulation, especially concerning the connectors. To perform this operation, count about a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to replace this bulb, point by point.
How to change the display bulb of the Volkswagen Golf Plus
Depending on the year of release, the methodology may vary slightly. It is likely that some covers or screws are not identical. This is the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the cover is completely removed, you need disconnect connectors that connect to the clock bulb of the Volkswagen Golf Plus. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally access the defective bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave us a comment if you have encountered specific concerns.