When the clock stops working, it can be annoying. So you have to change the display bulb of the Volkswagen Golfsvan. Even if the dashboard is still functional, it lacks several pieces of information in order to circulate in good conditions. This operation is not hard to execute, but requires a minimum of thoroughness. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb, point by point.
How to change the bulb on the Volkswagen Golfsvan display
Depending on the years of production, the methodology may vary slightly. It is possible that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Volkswagen Golfsvan. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can access the defective bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered any particular concerns.